EPC Track Record

One of the biggest places to get hired offshore in Louisiana is in Lafayette. Lafayette Parish had, at last count by the Department of Labor, over jobs in the oil industry. Several companies have important regional offices in Lafayette, so to target those specifically you can read more in our article about finding offshore jobs in Lafayette. Get hired for an entry level job right here in Louisiana. Join now for free to see all the jobs available, get expert advice, and a FREE subscription to our newsletter that reveals all the tips and tricks to get you hired! Privacy Policy Of course, another important place in the Louisiana offshore job market is all of Terrebonne Parish.

How to Hook Live Bait

Alli has a Bachelor of Science in Civil Engineering from Texas Tech University and is a Facilities Engineer, in a commissioning process engineer role for a large offshore hook-up and commissioning campaign in Angola, Africa. Her campaign is currently in the tail-end of commissioning a large platform and has been preparing to commission a liquefied petroleum gas LPG plant. Alli, what keeps you motivated when situations get difficult offshore?

I also get outside, get some vitamin D whenever the sun is calling! I just recently bought at house in Houston and remodeling and decorating is now filling up my time off — not to mention emptying my bank account! However, I am reminded that I am here for a purpose, and if that purpose is trial by fire — bring it on!

Activities. Dragados Offshore provides comprehensive solutions from concept to delivery. Our services include: detail design, construction engineering, procurement, construction, transportation, commissioning, offshore installation, and hook-up of offshore fixed platforms, offshore floating platforms, offshore wind power, subsea systems and shallow water pipelines, onshore modular .

Image courtesy of Total. As the two fields are adjacent the joint development of their reserves was a good option. In the project partners reached agreement on a development plan comprising two wellhead platforms — one on each field — tied into a shared processing and export platform. The other stakeholders are: Elgin-Franklin offshore reserves Reserves are estimated to be approximately 60 million cubic metres of condensate and 50 billion cubic metres of gas.

First production from these two adjacent gas fields was brought on-stream in March and this is expected to continue until The sour condensate gas, which has an average carbon dioxide content of 3. Brought on-stream in , by March the fields had achieved peak production of , barrels of condensate and million cubic feet of gas a day. In , a new, record-breaking well was developed from the Elgin-Franklin platform to the West Franklin reservoir, which is the hottest, highest-pressure reservoir in the world.


This approach has safety benefits due to enhanced control over the activities along with distinct cost advantages. Scope Definition Detailed offshore surveys are carried out to build up a defined scope of work for our experienced Engineering Team. Relevant information is collated including existing documents and drawings, performance standards, environmental data, etc.

Planning Once we have a very detailed defined scope of work and basis of design in place, our offshore construction co-ordinators begin preparation of the Construction Workpacks and Jobcards, which are automatically fed into the progress and productivity reports. Hook-Up Sembmarine SLP Offshore Group has many years of experience hooking up complete new build platforms, accommodation and process modules and diverse brownfield projects such as well hook-ups, subsea tiebacks to existing platforms and installation of Pre-Assembled Units PAU such as fiscal metering systems, proppant hydrocyclone packages and Wellhead Power Units HPU.

Offshore Technology is using cookies. We use them to give you the best experience. If you continue using our website, we’ll assume that you are happy to receive all cookies on this website.

Ranger Offshore provides subsea construction and related support services to the offshore oil and gas industry. Ranger operates rigorous HSE and Quality management systems in accordance with international standards and statutory and regulatory requirements. Our management systems reflect our commitment to safe, environmentally-sound practices and operations as well as our commitment to consistency, continual improvement, and customer satisfaction. This dedication extends to all aspects of our work.

Diving Services Ranger Offshore provides dive services for virtually all types of marine and subsea operations. From shallow water operations to complex underwater welding projects requiring saturation dive systems, we have the technology and experience to efficiently complete your every project. Because the unit is portable, it can be deployed using Ranger Offshore’s vessels or customer’s vessels. From routine, ongoing inspections and maintenance to emergency repairs, you can rely on Ranger Offshore to the get the job done right.

Coast Guard inspected vessels offers turnkey plug and abandonment services throughout the Gulf of Mexico. Our management, operation team and divers also are experienced in subsea construction and the installation of subsea components. This experience allows Ranger Offshore to offer superior services worldwide.

Issues in offshore platform research

The contracts have a total value of slightly less than NOK 1. Aker Solutions has the riser platform hook-up, and hook-up options for the field’s processing and living quarter platforms, which are scheduled to be installed in Aibel has the drilling platform hook up, with provision in the contract for options to hook-up two further platforms. Johan Sverdrup, km west of Stavanger, Norway, is one of the five biggest oil fields on the Norwegian Continental Shelf, with expected resources of 1.

The nuts and bolts of choosing the right investment platform – the accounts to pick, the fees to avoid, and other pitfalls investigated.

Fuel Drill water This approach turned out to be a very cost-effective way to drill from small fixed platforms. The semi hull offers superior station keeping and vessel motions compared with ship or barge-shaped hulls: The columns offer a reduced area to excite the hull The work platform or main deck is above all wave action TADs are seeing new use on deepwater production platforms, such as spars, tension leg platforms TLPs , and deepwater fixed platforms, which operate beyond jackup water depths.

Converted in from a semi MODU. Growth of offshore drilling units Things were off and running in the s, with numerous operators getting into the rig ownership and operation business and new drilling contractors being formed every year. In the early s, Shell Oil saw the need to have a more motion-free floating drilling platform in the deeper, stormier waters of the GOM. Shell noticed that submersibles like the Mr.

Charlie, now numbering almost 30 units, were very motion free afloat compared with monohulls. The idea was to put anchors on a submersible, use some of the California technology for subsea equipment, and convert a submersible to what is now known as a semisubmersible or semi. Thus, in , the submersible Bluewater I Fig. In fact, in the mid s, Shell Oil offered the industry the technology in a school priced at U.

Then came the Ocean Driller, the first semi built from the keel up Fig. The Ocean Driller, designed and owned by ODECO, went to work for Texaco in , with the mooring and subsea equipment owned by the operator, as was common in the s.

Hook Up & Commissioning

Ibrahim Orehin Chevron Nigeria Ltd. The Systems Completion SC procedure was a key contributor toward the seamless commissioning of the platform during this short window. First gas from the facility was recorded on June 28, JV, was installed in late December at the Meren field offshore Escravos, Nigeria, in approximately 50 ft of water. Dynamic positioning float-over installation of the integrated topsides onto the jacket substructure followed by the installation of ancillaries such as connecting bridges to existing production platform and emergency flare towers were completed on Jan.

The topsides, weighing about 7, tons, were fabricated and assembled in Ulsan, Korea.

The Shah Deniz field is located in the Azerbaijan sector of the Caspian Sea, approximately km south of Baku and 90 km east-south east of Sangachal in water depths ranging from 50m to m.

CC lake Originally Posted By: We used to take my dad’s 20′ boat out offshore regularly. This was back before GPS and all that stuff. Anyway, we pull up to a rig and dad decides he wants to tie off to it and fish a while. His buddy gets on the controls, and my dad surveys a large line hanging from the rig, and figures a rope he has with a clip on the end will just go around the line and hang on the knot at the end.

So dad steps up on the front deck and readies himself. His first attempt to get the clip on the line failed, and at this point he’s using the line hanging from the rig to keep his balance. So he had an instant to decide, let go of the line hanging from the rig and fall in the water, or, and this was not his shining moment, hang onto the line and see what happened next.

Spar platforms

The Company also announced that its Floating-Production-Storage-and-Offloading FPSO vessel, the first in service in the history of Peru, is now in position near the CX platform and is being prepared to receive production from the platform. Now that the necessary transportation clearance has been received the Company expects to ramp-up production to approximately 6, barrels of oil per day bopd towards the end of June, approximately a month later than previously projected.

The unexpected administrative delays incurred in obtaining the clearance for oil transportation will cause the Company to miss its second quarter production targets.

Instrument Hook Ups. Instrument Hook Up Diagrams detail the accessory and tubing hookup for both process and pneumatic instruments based on the tag number.

About Clough Established in , Clough delivers an integrated Engineering, Procurement and Construction service to oil and gas and mineral resources projects primarily in Australia and South East Asia. The Group’s services range from concept development through design, construction, installation, commissioning, operations and maintenance. Backed by an experienced management team, over 3, personnel and sophisticated project management systems, we are recognised for our commitment to safety, sustainable development and the wellbeing of the people, communities and environments in which we operate.

The services will be provided over a 40 month period commencing immediately. The agreed scope of work includes the provision of management, labour, materials and a selection of an accommodation support vessel to assist Chevron with pre-commissioning, commissioning of integrated float over deck systems, offshore hook-up, and start-up assistance. The Wheatstone Processing Platform will be one of Australia’s largest offshore facilities with a topsides weight of around 37, tonnes and a total deck area of 20, square meters, including primary processing equipment and facilities.

The topsides will be transported to the offshore installation site on a barge, and installed onto the substructure using a float-over procedure.

Offshore facilities: Platforms, structures in oil and gas piping systems

A full-fledged well-equipped workshop to undertake pre-fabrication works acquired at Rabale, Navi Mumbai. Some of them are highlighted below: The job included structural, piping, architectural, equipment erection, electrical and instrumentation works. The electrical and instrumentation work involved laying of approx.

Keppel FloaTEC LLC, a wholly-owned subsidiary of Keppel Offshore & Marine Ltd (Keppel O&M) has secured a contract worth about US$40 million from PTSC Mechanical & Construction (PTSC M&C) to provide engineering, technology and construction management support services for the Repsol Ca Rong Do Tension Leg Wellhead Platform (TLWP) to be built in Vietnam.

The company said the new scope will be executed by Aker Solutions in a split operation model with Kvaerner. The work will primarily consist of planning, management, and hook-up of the Johan Sverdrup utility and living quarter module. It will also include the hook-up work in connection with the phase two modifications of the riser platform. According to the company, the preparation work starts this fall and will involve about people from Aker Solutions, Kvaerner, and Equinor, rising to people working in rotation offshore on the project.

Offshore work for the utility and living quarter platform is scheduled to begin in the second quarter Kvaerner has already delivered the three largest and most complex substructures out of four for the first phase of the Johan Sverdrup project. Topside installation in The giant Johan Sverdrup oil field in the North Sea offshore Norway will be developed in two phases.

Offshore Workers ‘Down Tools’ on North Sea Platform

It is one of the appendices in “Supply Ship Operations” but items can be added at the request of our readers. Typically a while ago some-one asked me what an “AB” was, so it is now the first item in the section. In the British nautical hierarchy after some time at sea a seaman can take an examination for EDH Efficient Deck Hand and then after further years at sea can be formally qualified as an AB. A hinged frame on the stern of offshore vessels used for the launching and recovery of manned submersibles, and initially for the recovery of anchors.

Propeller shaped units fitted inside the mud tanks of supply vessels to keep the solids in suspension.

DUKE OFFSHORE LIMITED is headquartered in Mumbai, India and is managed by a dynamic group of oil field and marine professionals. Our Engineering Division has dedicated teams of engineers and support staff who are specialised in hook up and commissioning of offshore oil field platforms, their maintenance, modification and inspection services.

Floating Production systems Fixed steel structures The fixed tower structures are the most common offshore structure. These structures are commonly used in water depths less than meters. However this can be used in water depths up to about meters. Within this category there are 4-leg, 6-leg, and 8-leg towers. Tension leg offshore Platforms The Tension Leg Platforms are used in water depths greater than meters.

They consist of a floating deck structure anchored to pile heads on the sea floor by means of long pipes, which are always kept in tension Semi-submersible vessels As fixed structures are not practical for water depth greater than around meters, so the offshore drilling operation is required to be carried out using a floating vessel.

A specialized marine vessel with good stability and seakeeping characteristics is known as semi-submersible vessel. It can be moved in different locations and anchored to the seabed using mooring system.